Suspension springs steels

Steel grade for suspension springs

Ori Martin is able to satisfy the most stringent specificatione concerning micro cleanness, surface decarburization and absence of surface defects. Ori Martin special steels are used for the production of spiral springs with two process: cold forming of a tempered spring wire and hot forming. Torsion and stabilizer bars are common field of application of such steel grade.

Suitable for the production of coil springs and torsion bars used in the automobile and railway industries. These grades of steel must have a high yielding point and tenacity after quenching and tempering to withstand stress under flexi-torsion.

Our refining and casting techniques enable us to achieve steel with good hardenability and a high level of micro-cleanliness.
Using the controlled rolling process we obtain products with a very low decarburisation level, absence of surface defects, tight tolerances and excellent characteristics of wire plasticity

Ori Martin Spa

via Cosimo Canovetti, 13
25128 Brescia BS
Italy
Phone: +39 030 39991/2/3
Fax Number: +39 030 2000924

Franchi Alberto
Italy
Phone: +39 030 3999 205
Fax Number: +39 030 2000924

Tel +39 030 3999 205
Fax +39 030 2000924
alberto.franchi@orimartin.it

Petroboni Alberto
Italy
Phone: +39 030 39991
Fax Number: +39 030 2000924

Tel +39 030 3999 272
Fax +39 030 2000924
alberto.petroboni@orimartin.it

Lombardi Alessandro
Italy
Phone: +39 030 3999214
Fax Number: +39 030 2000924

Tel +39 030 3999 214
Fax +39 030 2000924
alessandro.lombardi@orimartin.it

Applications