Re-bars

Rebars

Ori Martin in the Ceprano (Fr) plant produces rebars for construction applications, The rebars are certified by the producer with the qualification test require by the IUAV Official Laboratory of University of Venice.

Official authorizations and quality certificates are available in the ‘Download area / certificates’

Diameter Range: 
8 - 32 mm
Length: 
6 - 14 m
Bundle weight: 
1,1 - 2,5 ton
Grade: 
B450C / FeB44K

ORI Martin - Ceprano

Via Oger Martin
03024 Ceprano
Italy
Phone: +39 0775 91771
Fax Number: +39 0775 912594

Zimpo Mario
Via Oger Martin, 21
Ceprano FR
Italy
Phone: +39 0775 91771
Fax Number: +39 0775 912594

Tel: +39 0775 91771
Fax: +39 0775 912594
mario.zimpo@orimartin.it

Billet warehouse

The billets, with 140x140mm and 160x160mm cross-sectional dimensions and 12 m length, are picked from the warehouse depending on the open orders and prepared for being loaded into the furnace.

Heating furnace

Rolling takes place with carbide rollers at very high speeds at controlled temperatures.

Roughing

Roughing is the first operation in the rolling process; it occurs at low speed through a series of stands containing cast iron rollers that effect an initial reduction of the billet's cross-sectional dimensions.

Rolling train

POMINI FARREL comprising 14 RED RING stands for producing round ribbed products in bars measuring 12–32 mm in diameter.

Finishing monobloc

POMINI FARREL type MB 260, with four stands (two vertical and two horizontal) and two lines, for producing bars with a diameter of 8–10 mm.

Cooling plate

The cooling bed guarantees a homogeneous structure. A blade system cuts the bars at the required length.

Bar warehouse

The bars are grouped in bundles then bound and stored in the warehouse.

Construction steels