Quenching treatment

Quenching and tempering bar treatment

O.R.I. Martin Spa is equipped for the Q&T induction treatments on bars in as rolled, drawn or peeled condition. O.R.I Martin Q&T bars are well known for the homogeneous structure and uniformity throughout the bar.

Diameter Range: 
12 - 65 mm
Length: 
3000 - 8000 mm

Ori Martin Spa

via Cosimo Canovetti, 13
25128 Brescia BS
Italy
Phone: +39 030 39991/2/3
Fax Number: +39 030 2000924

Franchi Alberto
Italy
Phone: +39 030 3999 205
Fax Number: +39 030 2000924

Tel +39 030 3999 205
Fax +39 030 2000924
alberto.franchi@orimartin.it

Petroboni Alberto
Italy
Phone: +39 030 39991
Fax Number: +39 030 2000924

Tel +39 030 3999 272
Fax +39 030 2000924
alberto.petroboni@orimartin.it

Lombardi Alessandro
Italy
Phone: +39 030 3999214
Fax Number: +39 030 2000924

Tel +39 030 3999 214
Fax +39 030 2000924
alessandro.lombardi@orimartin.it

Straightened bars warehouse

The straightened and checked bars are picked from the warehouse and prepared for peeling.

Induction heating

Heating occurs through induction by raising the bar's temperature to 700–750° C.

Water cooling

Water cooling crystallises the structure and increases its hardness.

Tempering

Tempering occurs through a second induction heating process at lower temperatures, around 500° C.

Plate cooling

Plate cooling is slower but improves the steel's tenacity value.

Quenched bars warehouse

The quenched bars are strapped and stored in the warehouse ready for being shipped.

Treatments